Airsoft Sniper Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
309 Posts
Prometheus is one of the top brands but if I'm not mistaking EDGI is better. Also look into a good bucking, since your bar10 is stock either go with a Nine ball bucking or a FireFly (soft) which is what I recommend.

Firefly Bucking
Nine ball Bucking
 

·
Registered
Joined
·
1,159 Posts
Firstly do as many DIY mods as you can! (e.g. TDC adjuster, shimmed hop up unit, teflon tape on cylinder head).

I would look in to R-hop and a new inner barrel.
 

·
Registered
Joined
·
234 Posts
I just cleaned/polished my barrel following a guide from this site and noticed a HUGE difference in accuracy.
Tightbore barrels are usually to get an increase in FPS not accuracy (Atleast my experience and knowledge).

Wrapped my entire barrel in paper until it was snug to slide back into the outer barrel - works great!

Going on what has worked for others I decided to go with the clear guarder bucking. We'll see how that goes.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top