Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I just bought a new Tanaka m700 AICS.
What I was wondering is what to expect as far as whats most likely to fail first? I like to have spare parts on hand and would like some heads up on what to order. Also maybe what to upgrade first. from what I have read form you guys so far is tight bore is probably the first direction to head. Maybe you guys could suggest where and what to get for me. I would much appreciate any help. Thanks
 

·
Registered
Joined
·
974 Posts
Well one of the first things to go is definitely gas seals, I'm not positive but I think I you can get them at local hardware stores and if not then hobby stores should have them. Make sure you keep your stock ones lubed with a little silicon oil to make them last longer.
The next thing that would be a good idea to upgrade is the hopup rubber, in the reviews I've read people always say the G&G rubber set is awesome. You can find that here:

http://www.wgcshop.com/pcart/shopper.php?itm=GG-PT-07082_cat_GG%20Parts

I agree with putting in a tightbore, here's KM's 6.04 that will fit in your rifle. It's not the tightest you can go but it's a good in between bore.

http://www.wgcshop.com/pcart/shopper.php?itm=KM-TN0M7AI_cat_Other%20Accurate%20Barrels

If you're using your rifle in the cold a lot, I'd suggest the G&G Power Pack or the G&G Power Bolt (if it fits, not sure) because you're going to need more power to overcome the cold. The Power Pack can be found here:

http://www.wgcshop.com/pcart/shopper.php?itm=GG-PT-07078_cat_GG%20Parts

Here's the Power bolt, it's should fit in your gun because it's just a Remington action on the Accuracy International frame but I can't confirm:

http://www.wgcshop.com/pcart/shopper.php?itm=GG-PT-07087_cat_GG%20Parts
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top