Airsoft Sniper Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
3,788 Posts
So he has around $450 into it.. I would want to know what this "custom bolt handle" is. Sounds like he broke it and tried to fix it and now wants to get rid of it.

Does he have pics of it?

If it looks like a good deal I would offer around 390-400 for it... See if that will go... Kind of play his responce and go from there.

If he does have pics of her, post them and we can take a look for you.
 

· Registered
Joined
·
3,788 Posts
Going off of the same pictures that mojo posted.

1.. That thing is very scratched.... been used a ton. Mine doesn't have that many on it and I have been using it for two years of solid play.

2.. I know on the PDI V trigger doesn't come with a safety.. Now the zero trigger I don't think has a safety either.

3.. Umm.... honestly ..... that thing looks like crap! Looks like it is an easy fix to something that was broken or fooked up...

4.. look at the rail... that either isn't the right rail for the rifle or it is on back words.

I would also see if you can't get some pictures of the rifle out of the stock. Just to make sure that there is a zero trigger in there. Unless you know the guy and trust him....

But looking at those pics... I would offer around 280-300.. untill he is able to provide more pics.
 

· Registered
Joined
·
3,788 Posts
No problem dude...

If you do want that rifle you can get it new for around $110.
A new barrel can be anywhere from $50-150.
Hop up bucking is around $20

That would be what you get to start off. Then we can talk you through some diy mods when you get the rifle. Or just take a look at zulus thread on the VSR topic.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top