Airsoft Sniper Forum banner

21 - 27 of 27 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #21 ·
That's crazy, JG is pretty much the same spec as TM.

The WELL MB03 on the other hand is not compatible, even though it's a VSR clone.
That's because the outer barrel is too small to insert the hop chamber
Good. Just gonna upgrade the hop up.(eventually I want to get a TDC) and the bucking for now..
 

·
Registered
Joined
·
691 Posts
There are different variants within the mb03. Some have the mag release in the stock, others have the mag release integrated into the mag block
 

·
Registered
Joined
·
255 Posts
I have had three different mb03s (the one is my personal rifle, the others were/are rentals). Two I still have. They are from different batches as well. They do all have mag releases in the stock. I have never tried the AA chamber in the other mb03s that I have but pretty confident it would be fine as the stock chamber from the first rifle is in one of the others. Outer barrels are stock. I did experience the small cylinder not being compatible with AA pistons. An AA cylinder fixed that.
 

·
Registered
Joined
·
5,356 Posts
I have fitted the AA chamber in a number of MB03's and it was fine too.
 
21 - 27 of 27 Posts
Top