Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
807 Posts
This thread is a little confusing as I am confused as to what you are referring to by "this set up". However, as far as a G36 hop up unit goes I can say this: that the stock TM plastic hop up unit is just fine for a DMR set up. I used one in my G36c DMR for a while and just moved the whole thing over to my SL9. I paired it with a guarder bucking and it
 

·
Registered
Joined
·
807 Posts
Personally, I would go with a Guarder hard bucking (there really isn't a whole lot of a bump in there if you did want to shave it down) and a metal nub in the hop up unit. If you really really really really want, you can try to go with a G or R hop, but thatll take some time and work.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top