Airsoft Sniper Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
222 Posts
Discussion Starter · #1 ·
Rules
1. No threadcrapping.
2. Item is sold as is
3. I will accept any reasonable offer.

I'm testing the water on my g3 dmr. I've spent multiple hours building this and now I need cash. It is a very well balanced gun with absolutely no wobble. It can make consistent shots at 220+ feet, and this was measured out with google earth. I would say the max range would be about 280 ft. If you have any question at all feel free to ask me. If this gun is purchased, I will include some replacement parts with it.

Pictures:





Gun:

jg g3 $140

external upgrades:

1. Matrix Defender Type Tactical M4 / M16 Metal Flashhider $18
2. Matrix Full Metal RIS for G3 / T3 Airsoft AEG Series $65
3. Barska scope $75
4. G3 claw mount $18
5. Slim rubber rail cover $15

Internal upgrades:
1. Matrix/prometheus 6.03 tbb $30
2. Mad bull 60 degree shark bucking $12
3. SCS/PCS hop up spacer $7
4. Systema Bore Up Jet Nozzle for G3 $17
5. JBU tappet plate $12
6. Guarder bore up cylinder $18
7. Guarder bore up piston head $28
8. Guarder bore up cylinder head $25
9. CA reinforced piston $20
10. Systema m120 spring $15
11. Matrix spring guide $13
12. Double eagle high torque motor $35
13. AEG burst wizard mosfet $40
14. Matrix 7mm bushings $15
15. Assortment of random gears $free

DIY mods: (free)
1. Shimmed hop up
2. Shimmed gun
3. Tape on spring
4. Perfectly sealed piston head
5. Moved nozzle head one MM closer to bucking and one MM closer to cylinder head to increase air seal.
6. Sound dampening tape on holes of GB

Extra's:

1. .43 bb's $15
2. 4 Mid cap mags $50

Total: $682

I will accept any reasonable offer.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top