Airsoft Sniper Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
97 Posts
Discussion Starter · #1 ·
So I going to do the annoying part here...

"what should I do" ?

I have bought a g&p xm110, and want to upgrade it.
Now it chrone 420, and not 3 more or 3 less. So happy with the FPS

Only thing is that the BB's are abit spread. Yes, i have up to maybe 60 meters (200 feets ithink)? but.. can't use the aim..

I need a good hopup solution. Now it stands a Prometheus chamber hopup and purple soft bucket (? is it called that on english). The inner barrel is unkown but i can post a pic tomorrow off it.

Yes, I have seen the sticky on the top of the forum, but i'm not great at english so it's a bit hard with all the technical language.
 

·
Registered
Joined
·
3,975 Posts
1...... Make an intro post in the beginner section.
2...... Read the guide at the top of this sub forum that Vindi wrote, "The Ultimate DMR guide "
3...... What part of the right have you worked on and what have you done before in terms of upgrades?
 

·
Registered
Joined
·
83 Posts
A lathe would be needed to enlarge the bore of the barrel. I cant think of anything else that could be used to do it.

I have not experimented on LRB's but would it be possible to do it on an AEG wich has the inner barrel hidden by a silencer? Or does the inner barrel have to be bent from the whole lenght?
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top