Airsoft Sniper Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
346 Posts
Discussion Starter · #1 ·
This is one area where, unfortunately, I'm woefully unprepared for working with my rifle.

I have a zero trigger. The issue is that one of the small springs (the ones with a circle of metal on either end that provide tension) that connects the (first?) trigger sear to one of the metal posts that provides support for the trigger body snapped. This means that when I go to cock the bolt, the spring has no tension.

I have a replacement part that is similar but not exact. I could probably find a part, but the issue is fitting it in
 

·
Registered
Joined
·
58 Posts
I had a spring break inside my Zero trigger. I was able to reassemble it properly and function properly when I replaced the spring. If you would like yours repaired, I'd be happy to do it for free, you just pay shipping, and tip me if you want to.
 

·
Registered
Joined
·
58 Posts
Shouldn't have done it for free
. Took me 2 hrs but I'm glad I was able to get it working for you again, and glad that I somehow remembered how to do that after 2years since I last touched one. Thank god for photographic memories.

Just make sure to suggest me to all your friends, I do AEG's too ;).
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top