[Ghost96]

Hey guys, so i finally got my action army zero trigger but i am having problems with it. I am using a 170 spring, but when i shoot, the air barely comes out of the cylinder. I shaved off some of the sides of the spring guide stopper and piston sear, but it didnt help that much. Should i file it unil it is the siZe of the stock sear and spring guide stopper?
Thanks

 

[dazz666]

A bit drastic!

Have you tried a making sure the pitson O-Ring is seated correctly or tried another O-Ring?

 

[raultiger]

The almost EXACT same thing happened to me! I got my trigger yesterday and my m170 seems like its an m100. Ghost have you had any problems cocking it? for me it wont cock unless i teak the ball bearings off my spring guide...its really weird

 

[rab1515]

Have you checked that your spring guide is being held on center with the cylinder? That should help with the need to take off the ball bearings on the spring guide.

 

[raultiger]

How would I check that? and if I find that is the problem, how would I fix it?

 

[Lightbulb]

You should only file the parts that are too wide to let you cock the rifle.

Try using the o-ring from the stock piston. The ones that come with triggers are often too loose.

 

[rab1515]

Take out the spring and piston and then move the bolt while holding the guide centered in the cylinder. You can see/feel if it is rubbing.