Hi guys!
I would like some advice on what upgrades I should get first. I am on a rather tight budget, so I can only reasonably afford one or two upgrades for my first rifle this summer, and I want to make sure I get the right ones. A high FPS isn't as important as having a consistent accuracy on a decent range (and no, I don't have number to add to that statement
..)
I have about 170-180$ put aside for this project (Rifle(94$) +Upgrades(76-86$)), and I aim to keep building the same rifle over time, so quality and durability of the parts is what I consider the most important.
The platform I have in mind is a BAR-10 G-spec, and I intend to run with a 430 mm barrel (I have a hunting scope just lying around).
These are the two barrel options I have in mind:
http://shop.ehobbyasia.com/tokyo-marui-precision-brass-barrel-and-new-chamber-set-for-vsr-10.html
http://shop.ehobbyasia.com/deep-fire-stainless-steel-6-02mm-barrel-for-vsr-10-430mm.html
the second question is if I should go for stronger spring+sears or a new hop-up housing and bucking. Which one does the most for accuracy and range?
The spring + sear combo I have in mind:
http://shop.ehobbyasia.com/deep-fire-stainless-steel-first-and-second-sear-for-tm-vsr-10.html
http://shop.ehobbyasia.com/mag-ma130-non-linear-spring-for-marui-vsr-10-series.html
(or) http://shop.ehobbyasia.com/laylax-pss10-130-spring-for-marui-vsr.html
or:
Housing+bucking
http://www.evike.com/product_info.php?products_id=37771 (which I guess is redundant if I go with the marui precision-set (?).
http://shop.ehobbyasia.com/firefly-...m/firefly-hop-up-bucking-hard-for-marui-vsr-10-hi-capa-g26-p226-m1911-mk23.html
Like I said, what I am wondering is in which sequence I should get the upgrades. These are my suggestions, but If you have your own I am happy to hear them.
I would like some advice on what upgrades I should get first. I am on a rather tight budget, so I can only reasonably afford one or two upgrades for my first rifle this summer, and I want to make sure I get the right ones. A high FPS isn't as important as having a consistent accuracy on a decent range (and no, I don't have number to add to that statement
I have about 170-180$ put aside for this project (Rifle(94$) +Upgrades(76-86$)), and I aim to keep building the same rifle over time, so quality and durability of the parts is what I consider the most important.
The platform I have in mind is a BAR-10 G-spec, and I intend to run with a 430 mm barrel (I have a hunting scope just lying around).
These are the two barrel options I have in mind:
http://shop.ehobbyasia.com/tokyo-marui-precision-brass-barrel-and-new-chamber-set-for-vsr-10.html
http://shop.ehobbyasia.com/deep-fire-stainless-steel-6-02mm-barrel-for-vsr-10-430mm.html
the second question is if I should go for stronger spring+sears or a new hop-up housing and bucking. Which one does the most for accuracy and range?
The spring + sear combo I have in mind:
http://shop.ehobbyasia.com/deep-fire-stainless-steel-first-and-second-sear-for-tm-vsr-10.html
http://shop.ehobbyasia.com/mag-ma130-non-linear-spring-for-marui-vsr-10-series.html
(or) http://shop.ehobbyasia.com/laylax-pss10-130-spring-for-marui-vsr.html
or:
Housing+bucking
http://www.evike.com/product_info.php?products_id=37771 (which I guess is redundant if I go with the marui precision-set (?).
http://shop.ehobbyasia.com/firefly-...m/firefly-hop-up-bucking-hard-for-marui-vsr-10-hi-capa-g26-p226-m1911-mk23.html
Like I said, what I am wondering is in which sequence I should get the upgrades. These are my suggestions, but If you have your own I am happy to hear them.