Bar-10

Last week bought my 1st sniper. Current upgrades (some will change soon)

Rifle: J.G. Works BAR-10
Hopup Chamber: Stock (will change to AA)
Hopup Bucking: Maple Leaf Decepticons
Bucking Hardness/Degree: 80°
Hopup tensioner/Spacer: AirsoftPro Lever
Barrel: Prometheus 6.03
Barrel Spacers: Custom
Piston: AirsoftPro Hybrid 90°
Piston Weight: -
Spring guide: AirsoftPro steel with bearing
Spring: M150
Cylinder: AirsoftPro
Trigger: AirsoftPro VSR Trigger Ver.3 90°, but made 105°
Ejection Port Cover: No
BB Weight: Specna Arms 0.43
Approximate FPS with 0.2gm: 645 +/-5 fps (Max in Latvia for bolt sniper is 656)
Approximate Joules with heavy bb: If calculator ir right - around 4 joules
Scope: 3-9 x 50 (Maybe will change to smaller)
Bipod: No
Silencer: No

 

Playing airsoft about 13y starting sniping

Rifle: Jing Gong Bar10
Hopup Chamber: Action Army
Hopup Bucking: Maple Leaf
Bucking Hardness/Degree: 60 Degree
Hopup tensioner/Spacer: Maple Omega Nub
Barrel: Maple Leaf Crazy Jet 6.04 x 428mm
Barrel Spacers: PDI
Piston: AirsoftPro 90 degree (RED)
Piston Weight: Approximately 30gm's
Spring guide: AirsoftPro
Spring: AirsoftPro M170
Cylinder: AirsoftPro Steel cylinder
Cylinder Head: Airsoftpro Straight w Sorbo
Trigger: AirsoftPro v4.1
Ejection Port Cover: No - for now
BB Weight: Madbull 0.45gm
Approximate FPS with 0.2gm: 650 +/-3 fps
Approximate Joules with heavy bb: 4j
Bipod: No
Silencer: Yes

 

Rifle: Well MB03
Hopup Chamber: Action Army
Hopup Bucking: Maple Leaf Omega
Bucking Hardness/Degree: 70
Barrel: Action Army 6.03 530mm
Barrel Spacers: Masking tape
Piston: Airsoft Pro
Spring guide: Airsoft Pro
Spring: Airsoft Pro M170
Cylinder: Action Army Teflon
Trigger: Airsoft Pro 4.1
Ejection Port Cover: Nothing yet
BB Weight: 0.38
Scope: RioRand 3-9x32
Bipod: No
Silencer: No

 

JG Bar 10 Stock
Wolverine Bolt with short stroke & return Spring mod
13ci Bottle under Barrel via printed Spacer
VSR-R Receiver with silencer adapter
Action Army HopUp with external TDC
TNT HS+ Barrel 430mm
Maple Leaf Autobot Bucking
Stalker Pantera Nub
Speed Adjustable Trigger
Action Army Long Rail
Novritsch Silencer
Action Army Bolt Handle & Cap, modded for a straight pull
3-9x50 Scope
Stock Pouch for Battery
Viking Tactics Sling

 

Been sniping for 3 years, started as one and fell in love, I take it apart every 2-3 games

Rifle: JG BAR10
Hopup Chamber: AA
Hopup Bucking: maple leaf autobot
Bucking Hardness/Degree: 60
Hopup tensioner/Spacer: maple leaf omega
inner Barrel: 6.01 maple leaf 430mm
Outer barrel: maple leaf 430mm bull barrel
Barrel Spacers: homemade from masking tape
Piston: maple leaf
Piston Weight: stock weight
Spring guide: maple leaf
Spring: cut-down maple leaf m135
Cylinder: maple leaf
Trigger: maple leaf 90 degree
Ejection Port Cover: No
BB Weight: Madbull 0.43
Approximate FPS with 0.2gm: 493 FPS
Approximate Joules with heavy bb: 2.35
Scope: BSA 4-16x44
Bipod: No
Silencer: No
Camo: Sprinter Custom Ghillie NextGen camo wrap
Rail: maple leaf bubble level scope rail

 

JG Bar 10

Sniping since 2016.

Rifle: JG BAR 10
Hopup Chamber: Action Army
Hopup Bucking: Maple leaf autobot
Bucking Hardness/Degree: 70
Inner Barrel: EDGI 6.01 435mm without bridge
Barrel Spacers: homemade from duct tape
Piston: Action Army 90 deg blue piston
Spring guide: Action Army
Spring: Element m125
Cylinder: Action Army
Trigger: Action Army Zero trigger
BB Weight: Noveritch .30gm bio bbs
Approximate FPS with 0.2gm: 450 FPS
Approximate Joules with heavy bb: (will update later)
Sight: NcSTAR 1x red/blue/green dot sight with weaver mount
Bipod: No
Silencer: No
Camo: Krylon tan and green spray paint with leaves used as stencils
Rail: stock rail
I superglued a neoprene buffer to the cylinder head and filled the stock with foam to dampen noise when shooting. I also added some fishing weights and hot glued them inside the end of the stock to balance the gun.

 

Scoutish built VSR10

Rifle: TM VSR 10 Pro
Hopup Chamber: stock
Hopup Bucking: ML MR
Bucking Hardness/Degree: 70°
Hopup tensioner/Spacer: Homemade 3D printed TDC
Barrel: Laylax/430x6.03
Barrel Spacers: Laylax
Piston: W.A.S.P
Piston Weight: 100g
Spring guide: W.A.S.P for 13mm spring
Spring: PDI 520fps
Cylinder: ML with HiFlow head
Trigger: Springer Custom Works budget 9.1
Ejection Port Cover: No
BB Weight: BLS/0.4g 0.45g
Approximate FPS with 0.2g: 445fps=1.85J
Approximate FPS with 0.45g: 400fps=3.35J
Scope: Vector Reaver 2-7×32 (long eye relief)
Bipod: No
Silencer: Yes

Added rail on top of outer barrel to mount LER scope in front and save iron sights on its place. Also TDC is built in rail.

 

Rifle: JG Bar-10
Hopup Chamber: Action Army
Hopup Bucking: Maple Leaf Mr hop
Bucking Hardness/Degree: 60°
Hopup tensioner/Spacer: panthera
Barrel: ML CJ 428
Barrel Spacers: JJ airsoft
Piston: WASP
Piston Weight: 100g
Spring guide: LayLax
Spring: LayLax SP130
Cylinder: Stock polished
Trigger: JJ airsoft , polished and shimed
Ejection Port Cover: No
BB Weight: BLS .40g
Approximate FPS with 0.2gm: 320fps
Approximate Joules with heavy bb: 1.75j
Scope: PCS 3-9x50
Bipod: No
Silencer: No

 

Rifle: Ex-Tokyo Marui (Only one screw is left from the original TM VSR-10)
Hopup Chamber: Action Army + EdGI TDC mod
Hopup Bucking: Maple Leaf
Bucking Hardness/Degree: 50
Hopup tensioner/Spacer: -
Barrel: Maple Leaf Crazy Jet 430mm
Barrel Spacers: Homemade
Piston: AIRSOFT PRO
Piston Weight: ?
Spring guide: AIRSOFT PRO
Spring: Action Army M160
Cylinder: AIRSOFT PRO
Trigger: AIRSOFT PRO
Ejection Port Cover: No
BB Weight: BLS .45
Approximate FPS with 0.2gm: ~525FPS
Approximate Joules with heavy bb: ~2.6Joules
Scope: CM 3.5-10*40
Bipod: No
Silencer: No

 

Rifle: Tokyo Marui VSR-10 G-spec
Hopup Chamber: Action Army
Hopup Bucking: Modify Grey
Bucking Hardness: 60°, R-hop hardness 70°
Hopup tensioner/Spacer: SS-arm
Barrel: DIY, 5.99X12X500mm
Barrel Spacers: Precisely Cut Foam
Piston: Wolverine Bolt Electriconic Version
Piston Weight: NA
Spring guide: NA
Spring: Airsaver Upgrade Kit With 3 Shims
Cylinder: Wolverine Aluminum
Trigger: Homemade Delrin trigger Box With Homemade Brass trigger
Ejection Port Cover: Delrin Sleeve
BB Weight: BLS .48
Approximate FPS: 0---650
Approximate Joules: 0J---5J with .48
Scope: Monstrum tactical 1-6X24 G2 LPVO
Bipod: Never
Silencer: 9 Baffle Solvent trap with 33X35mm Carbon Fiber Secondary Extension Filled With Calmflex Foam and the Smallest Holes I Could Get Away With

 

Crius's TM VSR10 Pro Sniper Rifle

1tonne asked to post out VSR10 part list after 2 years of sniping. I'm not sniping 2 years, but almost 1 year.
Nevertheless i just needed to changed only 4 buckings, 3 springs and a scope from my original list. Zero issues from firing day 1.
I changed the springs only because of field limitations, no due to issues.
I changed four buckings only to get the one with best bb trajectory and accuracy during flight time. All of these buckings never caused issues, all of them can lift heavy bbs.

Rifle: TM VSR-10 PRO
HOP-UP chamber: Maple Leaf
HOP-UP arm: Stalker Panthera
HOP-UP nub: Stalker Panthera Concave
HOP-UP bucking: TNT TR-Hop 60' / ML Super 75' / ML Monster 75' / ML Mr HOP 70' (in use)
Outer Barrel: Action Army Fluted & Tapered
Inner Barrel: Maple Leaf C.J 6.04mm 550mm
Inner Spacers: x4 Custom/Homemade
Laylax PSS10 Cylinder Teflon
Laylax PSS10 Cylinder Head
Laylax PSS10 Piston 90°
Laylax PSS10 Spring Guide
Laylax PSS10 Spring 170SP / 150SP / 130SP
Trigger unit: Bulltrigger+
Scope: AIM 8-32x50EF / 4-12x50IR (in use)
Silencer: 130mm
Bungee 2 points sling
Ejection Port Cover: Yes
Bipod: NO
Magazine: Homemade Decorative
BB Weight: Geoff's-BLS / 0.48gr, 0.50gr

FPS measurements using Laylax PSS10 SP130 spring:
Approximate/Average FPS with 0.20gr: 500fps / 2.31j
Approximate/Average FPS with 0.25gr: 453fps / 2.37j
Approximate/Average FPS with 0.48gr: 300fps / 2j
Approximate/Average FPS with 0.5gr: 298fps / 2.05j

*Approximate/Average FPS with Laylax PSS10 SP150 spring / 0.20gr: 550-548fps / 166.59m/s / 2.78j

 

Rifle: HFC VSR-11
Hopup Chamber: stock Chamber
Hop up: Action Army VSR10
Hopup Bucking: Maple Leaf Decepticon 70⁰
Hopup nub: Maple Leaf Omega
Barrel: Maple Leaf 410mm tightbore 6.02mm
Barrel Spacers: Maple Leaf Whisper
Piston: Maple Leaf Piston
Spring guide: Maple Leaf zero resist spring guide
Spring: Maple Leaf M165
Cylinder: Action Army Masamune Cylinder kit
Cylinder head: Action Army Masamunr Cylinder kit
Trigger: Maple Leaf 45⁰ full steel sear assembly
BB Weight: ICS .2g bbs
Approximate FPS with 0.2g: 700fps
Scope: 4-16X40 AOE Bushnell
Silencer: Generic tube with Maple Leaf Whisper Suppressor Baffles

 

Rifle: Jing Gong Bar10 GSpec Converted to Pro.
Hopup Chamber: Standard
Hopup Bucking: Nine ball
Danger Werx Type-B/Gunsmithy Arm & TDC Turret
Barrel: 6.03mm x 430mm Laylax
Outer Barrel: Laylax
Receiver-PDI
Barrel Spacers: Laylax
Piston: Laylax Neo High Pressure PSS10
Spring guide: Laylax PSS10
Spring: Laylax 150/170
Cylinder: Standard/Polished/Secret Lube
Air Cylinder Head- Laylax PSS10
Trigger: Standard/Strengthened
Ejection Port Cover: Sealed
BB Weight: 0.25/0.38/0.43/0.5g
Approximate FPS with 0.2gm:

 

Rifle: TM VSR10
Hopup Chamber: AA hopup chamber
Hopup Bucking: ML autobot
Bucking Hardness/Degree: 60 (yellow)
Hopup tensioner/Spacer: panthera nub concave / omega nub
Barrel: edgi 6.01 unbridged 430mm
Barrel Spacers: atm none bcs edgi barrel is thicker then usual gonna make homemade
Piston: edgi high pressure
Piston Weight: 48g (added weight to get some joule)
Spring guide: edgi
Spring: AA m170 (cutted)
Cylinder: edgi
Trigger: stock
Ejection Port Cover: No
BB Weight: Nov 0.46
Approximate FPS with 0.2gm: 550fps w/ 0.2
Approximate Joules with heavy bb: 2.8j with 0.46
Scope: Nov scope 3x-9x 50mm
Bipod: No
Silencer: No

 

Rifle: Slong SSR10
Hopup Chamber: Stock Slong, removed parts for TDC
Hopup Bucking: ML MRHop Rubber Version modded with PTFE Tape, PTFE Grease, Edgi Airleak Ring, Maple Leaf Metal Ring with card shim
Bucking Hardness/Degree: 80 Degrees
Hopup tensioner: Stock (concave), hop arm calling card shim by @SiliconeSword, Tridos TDC
Barrel: Edgi 480 mm 6.01 dual bore Brass
Barrel Spacers: 2 pcs Stock (rebored to accommodate thick Edgi barrel), full foam
Piston: Edgi SAP
Piston Weight: 130g
Spring guide: Edgi SAKTO
Spring: Edgi SP02 Full Coil
Cylinder: Edgi Bore Up Jurassic
Trigger: ML 90 deg with Edgi Quick Release
Ejection Port Cover: Yes
BB Weight: .48 BLS non bio
Approximate FPS with 0.2gm: 437
Approximate Joules with heavy bb:
Scope: VO Continental 4-24x50 Tactical FDE with Kill Flash
Bipod: ACM Harris Bipod
Silencer: Edgi Gated, all metal

Other Accessories:
Scope rail Mount attached to outer barrel
Bubble Level
Motor Oil for use on threads and cylinder
Maple Leaf Mag Carrier
Magpul AR Pistol Grip
Magpul 2 point sling
ACM Swivel

NOTE: All my Edgi parts are second-hand

 

How does the gated suppressor compare to others you've used?

 

I've only used 4 in and 6 in ACM cans on my AEG and have tried mounting in to my SSR. Used scouring pad and paint roller as inserts on these. I can only hear a light slap of the piston and the whiz of the bb within 20ft using the Windtalker compared to my modified cans on a 130 g piston, .48 bb, SP02 spring, and no airbrake. My guess is that a lighter spring and max airbrake will dampen the sound even more.

The end cap of the Windtalker (the one attached to the outer barrel) is shaped like a megaphone also works as a loudener and makes the VSR sound really loud.

The downsides are that it is long and heavy, probably around 700 grams. Proper alignment is also needed or else there would be baffle strikes. Firing downward from a 45/225 degree angle will close the gate and will not open again if you keep on that angle. Tilting upwards slightly will open it again. Aiming from anything lower than those angles in my experience will result in a combination of the gate closing, the bb hitting the gate, or your bb getting stuck in the barrel.

The Windtalker is so effective that when you fire when the gate is closed, there is a chance that your bb will not even leave out of the barrel especially on undervolumed builds.

I've heard that they replaced some parts with lighter materials in the newer version making it easier to use

 

I'll need to figure out how to make one myself, but it's too bad I can't put on on my M4

 

Oh btw it doesn't work on quick fire/burst/full auto.

 

Súng trường: HFC VSR-11
Phòng Hopup: Phòng chứng khoán
Nhảy lên: Đội quân hành động VSR10
Hopup Bucking: Maple Leaf Decepticon 70⁰
Hopup nub: Maple Leaf Omega
Thùng: Lá phong 410mm, nòng kín 6,02mm
Miếng đệm thùng: Lời thì thầm của lá phong
Pít-tông: Pít-tông lá phong
Hướng dẫn lò xo: Hướng dẫn lò xo chống lò xo Maple Leaf
Mùa xuân: Lá phong M165
Xi lanh: Bộ xi lanh Masamune quân đội hành động
Đầu xi lanh: Bộ xi lanh Masamunr của quân đội hành động
Kích hoạt: Lắp ráp sear hoàn toàn bằng thép Maple Leaf 45⁰
Trọng lượng BB: ICS .2g bbs
FPS gần đúng với 0,2g: 700fps
Phạm vi: 4-16X40 AOE Bushnell
Bộ giảm thanh: Ống chung có vách ngăn ngăn chặn tiếng thì thầm của lá phong
[/TRÍCH DẪN]
Với m165 vẫn tốt cho trigger

 

Khởi đầu là một tay bắn tỉa airsoft, chuyển sang aeg/dmr được 2 năm và năm vừa qua đã quay trở lại với nghề bắn tỉa. Kéo súng của tôi ra rất thường xuyên.

Súng trường: JG BAR-10
Buồng Hopup: Buồng Hopup AA
Hopup Bucking: R-hop và Falcon Bucking??(không chắc chắn 100%, nó bịt kín tốt)
Độ cứng / độ Bucking: 65 bờ
Bộ căng/Miếng đệm Hopup: núm lõm tự chế sử dụng ống R-hop
Thùng: ZCI 6.02 405mm
Miếng đệm thùng: Bọt tự chế và một số miếng đệm băng
Pít-tông: AA 90 độ
Trọng lượng pít-tông: Không xác định
Hướng dẫn lò xo: AA
Mùa xuân: AA M170
Xi lanh: Cổ JG
Kích hoạt: Bộ kích hoạt chuyên dụng AA 90 độ
Nắp cổng phóng: Không
Trọng lượng BB: 0,43g BB Vua
FPS gần đúng với 0,2gm: Atm không xác định
Joules gần đúng với bb nặng: 2,8J 0,43g
Phạm vi: Ma trận 3-12x50 (Tôi hiểu rồi vì nó lớn)
Bipod: Đôi khi, thương hiệu không xác định
Bộ giảm thanh: Có
[/TRÍCH DẪN]
With m170 still good now

 

Rifle: Marui
Hopup Chamber: Marui
Hopup Bucking: flamingo
Bucking Hardness/Degree: 70
Hopup tensioner/Spacer: tdc tridos
Barrel: pdi 303mm 6,01
Barrel Spacers: homemade
Piston: pdi
Piston Weight: don’t know
Spring guide: pdi
Spring: pdi
Cylinder: pdi
Trigger: pdi
Ejection Port Cover: no
BB Weight: 0,40 nimrod
Approximate FPS with 0.2gm: 420
Approximate Joules with heavy bb: 1,60
Scope: vector optics 2x7x32
Bipod: no
Silencer: Yes