[king..kranium]

Utg shadow ops, my rifle has a wobbly magazine when it's in the rifle. Any fixes?

sent from my dx2 w/paranoid android

 

[Bushmaster Recon]

Is there any wear to the mag or mag catch?

 

[Masterjuggler98]

I have had that happen to me on my well mb-10, that is if you are talking about side to side play. As long as the mag works fine, just put a little black duct tape or electric tape (although electric tape tends to peel off) on the sides of the mag or in the magwell if you use multiple mags.

 

[Bushmaster Recon]

if you are talking about side to side play. As long as the mag works fine, just put a little black duct tape or electric tape (although electric tape tends to peel off) on the sides of the mag or in the magwell if you use multiple mags.

Just put your foot in the door before me

 

[king..kranium]

Is there any wear to the mag or mag catch?

No, the mags are brand new... I might do the tape thing.

sent from my dx2 w/paranoid android

 

[Masterjuggler98]

I do the tape mod to almost all my gun's mags to stop vibrations to make it quieter. I think Inthetallgrass's silencing guide had something similar about putting tape on the bipod for this purpose.

 

[Grudge]

ANother good way is to add a small piece of velcro (the fuzzy side) to the inside of the magwell. That way you only have to add it once not everytime you get a new magazine! Just check fit first before slicking it in place. Usually one side works better than the other!