Airsoft Sniper Forum banner

Wolverine Bolt/Wraith questions

5.2K views 6 replies 6 participants last post by  conner.oglesby  
#1 · (Edited)
So I recently decided to squeeze every drop of performance out of this gun. Short of getting Reliku's receiver, I'm right there, including installing a Wolverine bolt, Storm Regulator, and Wraith kit. As it stands I have a couple questions I was hoping some people could help answer.

My field limits hpa sniper rifles to 2.3J (chrono'ed with .32) Using a 428mm CJ barrel what weight bb would give me the best performance?

Does anyone have any experience with what psi I will most likely need to run to achieve these joules, without having to spend the money to buy .32 bbs and a chrono, just to figure out if I need to get the tuning kit? I'm pretty sure I have perfect compression, so there shouldn't be any variation in the volume of air.

Lastly, how many shots can I expect out of a single cart at different psi settings you have experienced with or without the air saver tuning kit?

Thanks for the help.
 
#6 ·
New wolverine bolt and wraith stock not shooting above 2.1 jules at 170 psi

Hello guys, i just got a new wolverine airsoft sniper bolt and c02 wraith stock back from the local airsoft shop but on the chrono i cant get above 2.1 jules. is there anything i can do to help fix this? On a side note, is it safe for my bolt to run it with this high psi?Thanks again im new to airsoft and i really appreciate it!