Airsoft Sniper Forum banner

Maple Leaf Autobot

6.6K views 14 replies 6 participants last post by  Noremac  
#1 ·
Hello,

Going to buy a maple leaf autobot 60 degree,

But are there two versions? One for AEG's, obviously I'm using in a TM VSR,

With a AA unit
And a open window (non bridged barrel)

Which version do I get? Or is there just one version - and my mistake.

Thanks
 
#11 ·
There is no Autobot for AEGs. Autobot and Decepticon are for VSR-cut only. Yet there are AEG equivalents, but are called Macaron or "new monster", or whatever. Not autobot.

The Autobot will work great with an open type barrel and AA chamber, but you should combine them with the maple leaf nub, which ironically is marketed as "for AEG". Most places would have them listed as "Maple Leaf Omega", "Maple Leaf Ohm", or "Maple Leaf Hop Tensioner for AEG".

I would go with 70Âş, 60 is way too soft. I would prefer the 75 if 70 is not in stock.
 
#13 ·
There is no Autobot for AEGs. Autobot and Decepticon are for VSR-cut only. Yet there are AEG equivalents, but are called Macaron or "new monster", or whatever. Not autobot.

The Autobot will work great with an open type barrel and AA chamber, but you should combine them with the maple leaf nub, which ironically is marketed as "for AEG". Most places would have them listed as "Maple Leaf Omega", "Maple Leaf Ohm", or "Maple Leaf Hop Tensioner for AEG".

I would go with 70Âş, 60 is way too soft. I would prefer the 75 if 70 is not in stock.
Yes, thanks for clearing things up.

It is the autobot, with the Omega concave nub, and got an AA unit along with a open type barrel.

Will order soon!
 
#12 ·
I bought 60D Autobot for my BAR10 which shoots 180m/s and I was glad about that. Was really nice bucking, till one side of patch lip ripped off. Just a small small side. Considering that all was ok, but I think next time I will buy 70D.