Yeah, it should work, but I recommend getting the kit with the Wolverine cylinder as idk how the threads line up.

You may or may not be able to use the standard trigger, but here is a stock one for super cheap if the standard one won't work.

Double Bell VSR-10 Trigger Part Set

www.airsoftgi.com

 

Yea I am thinking about getting the entire system with the cylinder and co2 regulator and the whole Shabang..

 

I'd avoid the CO2 assembly, as CO2 isn't a very good power source due to temperature fluctuations, costing more per shot, and only getting 100 shots of so per fill.
If you are dead set on CO2, I'd go for a Polarstar adapter and their MR reg, as the adapter is better and the reg is as good but more compact.

 

Got a link??

 

Micro Reg™ GEN2

When the original Micro Regulator™ came out it was an instant hit since it was ultra compact yet offered the performance of regulators twice its size. With the introduction of the second generation of this regulator, we've simplified manufacturing and ease of maintenance while retaining its...

polarstarairsoft.com

You may need the upgrade spring for this to achieve higher PSI, but it's only a couple dollars

CO2 Inserts

Our CO2 inserts are manufactured for both the UGS and CGS stocks and have models for both the 12g and 33g disposable CO2 cartridges in either variant. However, the inserts have more uses than just being paired with one of these stocks. Since they are equipped with the same standard ASA threads...

polarstarairsoft.com

Both 12g models will work for what you want

You'll likely have to order from a site like Amped Airsoft as Polarstar is really busy making stuff so they can't really keep up with orders, but you'll know what products to look for.

 

Crap, sorry commented on the other when this has more of a discussion…. E Bolt for the win!!