VSR upgrades help.

wesley810 · Mar 25, 2012

From what I've read, that certain point isn't very long either (around 450mm I think)- correct me if I'm wrong.

@0326reconman: Switching the barrel length to 450mm won't make nearly as much of a difference in the performance of your rifle as hop-up mods and quality of parts will. I wouldn't worry about changing the length unless you really wanted to. I'd focus more on the hop-up mods and such that you originally listed and what were recommended, as those are what will really add range and accuracy to your rifle.

Cheese Man · Mar 25, 2012

Right on the money on all counts.

slayerfanx55 · Mar 25, 2012

Okay, so according to cheese man, the TM chamber is good and it already comes with the barrel. So That plus the R-Hop, and the purple nineball bucking. What nub should I use with that, I've read that the SCS is good, but also bad since it's hard? I had one for my L96 which I have yet to install.

As for the quality, I use strictly laylax and PDI. I have never even considered using any of those cheap-o's. I always try to go for the best I can get, even if it means waiting a bit more.

And no one has said anything about the laylax VSR-10 Chamber. Is it any good?

Cheese Man · Mar 25, 2012

No SCS with r-hop, I use rubber, but HS5 makes M-nubs that also work quite well with the r and er-hops.

Good.

Meh, it is fine, but I would go strictly TM for my builds.

slayerfanx55 · Mar 25, 2012

What do you mean strictly TM? TM as in stock parts? Or do they make their own after market parts other than the chamber?

wyvernfist · Mar 25, 2012

0326reconman said:
And no one has said anything about the laylax VSR-10 Chamber. Is it any good?

Cheese Man said:
Meh, it is fine, but I would go strictly TM for my builds.

0326reconman said:
What do you mean strictly TM? TM as in stock parts? Or do they make their own after market parts other than the chamber?

See above :tup:

MiloXC3 · Mar 25, 2012

Laylax chamber requires an AEG barrel and bucking.
The TM Precision chamber comes with an inner barrel.

If I were you, I would get Firefly hard rubber instead of Nineball, and I would get the TM Precision chamber with the 430mm barrel and install the barrel in to the suppressor of the G-Spec. As someone said earlier, you will need to file the inside a bit but it will fit one you have done that.

slayerfanx55 · Mar 25, 2012

wyvernfist said:
See above :tup:

Ahh. I see. My bad. I thought he had replied to something else. :ashamed:

Cheese Man · Mar 25, 2012

No worries man.

VSR upgrades help.

wesley810

Cheese Man

slayerfanx55

Cheese Man

slayerfanx55

wyvernfist

MiloXC3

slayerfanx55

Cheese Man

Top Contributors this Month

Recommended Communities